Water Pump for 5 Gallon Bottle Water Dispenser Pump System for Fridge
SPECIFICATIONS: Input: AC100-130V, 50-60Hz Output: DC12V Max Current: 1.2A PSI Cut-off: 60 PSI Dimension: 9x4.6x3 In PACKAGE INCLUDES: 1 x Pump Module with a Rocker Switch 1 x 5 Feet Power Cord with a US Plug 1 x 20 Feet PPR Discharge Hose/ Tube (Diam:6.35mm /0.25 Inch) 1 x 48-Inch Suction Hose and adjustable 22.2-Inch Dual Suction Wands with 55mm Seal Caps 4 x Silicone Screws (for mounting) to minimize the vibration or noise 1 x Optional Fitting for Refrigerators or Faucet etc. (a Compression Nut and a Sleeve/Ferrule) 1 x Installation and Maintenance Instructions TIPS FOR USERS: Pls. Read the Instructions and Clean the Pump system (P4-5 of Instructions) before installation. There may be water residual left inside. Be sure to remove the Inlet Pressure/ Flow Restrictor or any Filtrator of Commercial Brewers or Refrigerators before Plumbing which may cause the pump's Over-cycling malfunction (P3). For Air-in-Pump which may also lead to Over-cycling without water suction (P6): After the Plumbing and turning the Pump on, pls. Open the Dispensing Valve of Appliances or Faucets to vent the airtill a constant water flow. For Refrigerators with Ice Makers, the Seal at the connection needs to be loosened or disconnected. BOTTLED WATER DISPENSING PUMP SYSTEM (no jugs included): dual adjustable suction wands, 20FT discharge hose of food-grade material, BPA free, compatible for fridge, ice maker, coffee maker, hot and cold water dispenser etc.