TDRSUPER Bottled Water Dispenser Pump System with Single Inlet 110V 60PSI Dr

  

New 5 Gallon Water Dispenser Pump Single Tube How it works: The bottle water dispensing system was designed to pump water from a commercially available 5-gallon water bottle. The heart of the system is the pump module that automatically adjusts the flow and pressure to fill an appliance or faucet, and stops automatically. The wand has a built in back-flow preventor value that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.

Wen the suction wand is inserted into the 5-gallon bottle, it will activate the float switch on the end of the wand and turn on the pump. This same float switch shuts off the system when the bottle is empty. The system will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator to the icemakere and chilled drinking water tap, and to certain commercial coffee/tee brewers.

Specification Voltage: 110V AC Flow Rate: 1 gallon per minute Maximum Water Pressure: 60 PSI Hose Outlet: 20 feet Package Content 1 x 40 PSI Water Dispenser Pump 1 x 20ft PE Pipe 4 x Noise Dampening Silicone Feet 1 x Universal Seal Cap Electric Intelligent Drinking Water Pump:This is the new upgraded bottle water pump system with a maximum pressure of 40 PSI 2. 8 bar and a higher water flow rate for the distribution pump system. Wide Range of Trial Use: Adjustable suction stick for universal connection of 5 gallon water bottles, faucets, refrigerators, ice machines, coffee machines, hot and cold water dispensers, etc. Smart on Demand System: Automatically adjusts flow, pressure and stops up to 60PSI when full; with float sensor switch and engine with overheat cut-off protection that automatically turns the pump system on or off. Fast and Smooth Low Noise: Silent operation, noise-reducing rubber feet reduce noise pollution, suitable for home kitchen office bar restaurant.

For our brand online sales of products, we guarantee after-sales service, we will help you solve problems as soon as possible. Please follow the instructions to reinstall it when the pump does not work. If the power supply and motor can be started, pull out the power of the buoy and pour water to see if it can be used. Please fill water in the pump manually after long time unuse to restart the pump.