Nitrous Outlet Mopar 90mm 5.7/6.1 Hemi Hardline Plate System (No Bottle)

  

Mopar 90mm 5.7/6.1 Hemi Hardline Plate System. Flow Up To 400 HP. High Flow Billet Aluminum Nitrous Plate. All Hardware, Electrical, and Jetting Included. Fits 5.7/6.1 90mm Hemi Truck, SRT-8, Challenger, Charger, 300C, and Magnum.

E85 Compatible with different jetting. Includes Jetting for 50-75-100-150-200 HP.

Gain up to 200 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge for the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.

The Nitrous Outlet Hemi Specific Nitrous system is the safest, best fitting, and most tuner friendly system available. This system is designed specifically for the 90mm 5.7/6.1 Hemi platform, including vehicle specific solenoid brackets, pre-bent hardline, and application specific hardware for the best fitment and cleanest install on the market.

This system includes a billet aluminum plate to fit 5.7/6.1L Hemi intakes with a 90mm throttle body and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels.

This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will help prevent engine damage. This system includes all of the necessary components, jetting, hardware and wiring to install a wet nitrous system capable of adding 200 HP to your vehicle. This system is specifically designed to fit the 5.7/6.1L Hemi intake with 90mm throttle body.

Does not fit the Arrington and may not fit other aftermarket throttle bodies.