110V Drinking Water Pump for 5 Gallon Bottle Dispenser Pump System for Refrig

  

110V Drinking Water Pump for 5 Gallon Bottle Dispenser Pump System for Refrigerator Ice Maker Coffee Machine Faucet (Classic- Dual Inlet). Style: Dual Inlet-CLASSIC Brand: TDRSHINE MPN: BW1020 UPC: Does not apply EAN: Does not apply.

Capacity: 5 Gallons, 1 Gallons. Product Dimensions: 3"D x 4.6"W x 9H. 3"D x 4.6"W x 9H. B - US style with ground plug. Date First Available: August 27, 2020.

BOTTLED WATER DISPENSING PUMP SYSTEM (no jugs included): dual adjustable suction wands, 20FT discharge hose of food-grade material, BPA free, compatible for fridge, ice maker, coffee maker, hot and cold water dispenser etc. SMART ON-DEMAND WATER DISPENSER: to activate or shut-off the engine via a float sensor switch and deliver water under pressure 40 PSI automatically on demand, with over-heating protection.

QUICK FLOW WITH DUAL INLET: 1 gallon/min, less water bottle changes, fit for residential or commercial appliances. LESS NOISE: recommended to fix the pump body inside a closet or on wall with provided silicone screws to minimize the vibration and keep the running noise less than 60dB (normally runs a few seconds intermittently) when priming. SPECIFICATIONS:Input: AC100-130V, 50-60HzOutput: DC12VMax Current: 1.2APSI Cut- off: 60 PSIDimension: 9x4.6x3 In PACKAGE INCLUDES:1 x Pump Module with a Rocker Switch1 x 5 Feet Power Cord with a US Plug1 x 20 Feet PPR Discharge Hose/ Tube (Diam:6.35mm /0.25 Inch)1 x 48-Inch Suction Hose and adjustable 22.2-Inch Dual Suction Wands with 55mm Seal Caps4 x Silicone Screws (for mounting) to minimize the vibration or noise1 x Optional Fitting for Refrigerators or Faucet etc.

(a Compression Nut and a Sleeve/Ferrule)1 x Installation and Maintenance Instructions TIPS FOR USERS:Pls. Read the Instructions and Clean the Pump system (P4-5 of Instructions) before installation. There may be water residual left inside. Be sure to remove the Inlet Pressure/ Flow Restrictor or any Filtrator of Commercial Brewers or Refrigerators before Plumbing which may cause the pump's Over-cycling malfunction (P3).

For Air-in- Pump which may also lead to Over-cycling without water suction (P6): After the Plumbing and turning the Pump on, pls. Open the Dispensing Valve of Appliances or Faucets to vent the airtill a constant water flow. For Refrigerators with Ice Makers, the Seal at the connection needs to be loosened or disconnected.