Cold nitrous will pass the air intake temp sensor in the "Y" intake pipe. This cools the sensor and tricks the computer into turning on the electronic choke. This extra fuel mixes with the nitrous at Wide Open throttle to make more power.
You can use your horn to activate the Nitrous. The Kit contains the following. 2 show polished aluminum 12oz bottles with High flow valves. 1.25" or 1.5" where it clamps onto your frame, if you do not specify a size you will get sent the 1.25 brackets. 2 foot Bradied lines from bottles to T fitting on solenoid. 2 foot braided line from the T fitting to the solenoid. High Flow 150HP DynoTune nitrous Oxide solenoid. Solenoid mounting brackets with hardware.Teflon tubing and fittings from solenoid to intake. 15HP, 30HP and 40HP jets includedyou should get the bike tuned at a dyno if using over 30HP jets. Complete electrical kit with switches, wire, connectors and a complete manual showing how to wire universal horn or starter buttons as the activation switch.
Installation instructions and tech support. The item "Harley Davidson Nitrous oxide System Twin Bottle, polished, billet brackets EFI" is in sale since Thursday, January 5, 2017.This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Nitrous & Parts". The seller is "dynotunesales" and is located in Bradenton, Florida. This item can be shipped worldwide.