(single bottle kit, not dual bottle pictured). This DynoTune 2 cyl Dry nitrous kit for EFI fuel injected V twin bikes, this is a show quality kit.Polished 12oz bottle, billet frame mounted bracket, braided steel line, High pressure teflon lines etc. The kit comes with everything you need for installation. The kit is capable of adding up to an additional 80HP, stick with lower HP settings unless you have a professional install and tune your motor. This kit is the easiest way to add tire smoking, safe power increase and amazing looks, to your V Twin, this is why DynoTune dominates the Motorcycle nitrous market. Cold nitrous will pass the air intake temp sensor in the "Y" intake pipe.
This cools the sensor and tricks the computer into turning on the electronic choke. This extra fuel mixes with the nitrous at Wide Open throttle to make more power. You can use your horn to activate the Nitrous. The Kit contains the following.
1 show polished alminum 12oz bottle with High flow valve. 1.25" or 1.5" where it clamps onto your frame, if you do not specify a size you will get sent the 1.25 bracket. 2 foot Bradied line from bottle to solenoid. High Flow 150HP DynoTune nitrous Oxide solenoid. Solenoid mounting bracket with hardware.
Teflon tubing and fittings from solenoid to intake. 15HP, 30HP and 40HP jets includedyou should get the bike tuned at a dyno if using over 30HP jets. Complete electrical kit with switches, wire, connectors and a complete manual showing how to wire universal horn or starter buttons as the activation switch. Installation instructions and tech support.The item "Harley Davidson Nitrous oxide System Single Bottle, polished, billet bracket EFI" is in sale since Wednesday, January 11, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Nitrous & Parts". The seller is "dynotunesales" and is located in Bradenton, Florida. This item can be shipped worldwide.